Casio SF-4300B User Manual

ay
38
PART 3 Data Management Functions
Note
the
foilowing
important
points
when
you
are
using
a
schedule
alarm.
«
The
alarm
indicator
and
time
are
automatically
cleared
after
the
alarm
time
is
reached.
*
Schedule
alarms
can
only
be
set
for
Schedule
Keeper
data
entries
that
include
time
data.
if
you
set
a
schedule
alarm
for
a
Schedule
Keeper
entry
with
time
data
and
then
later
clear
the
time
data,
the
schedule
alarm
is
also
cleared
automatically.
«Ifthe
schedule
alarm
time
is
reached
during
data
communications,
the
alarm
does
not
sound
until
you
complete
them.
The
alarm
may
fail
to
sound
if
battery
power
is
too
low.
If
the
message
“SECRET
DATA!"
appears
on
the
display,
it
means
that
a
schedule
alarm
time
set
in
the
Secret
Area
was
reached.
To
set
a
schedule
alarm
when
inputting
data
1.
Enter
the
Schedule
Keeper
and
input
data,
using
the
procedures
described
in
steps
1
through
7
under
“To
input
Schedule
Keeper
data”
on
page
36.
2.
Aiter
inputting
the
description,
press
V.
You
can
press
the
V
without
inputting
anything
for
the
description.
3.
input
the
schedule
alarm
time.
Use
the
[>
and
<j
cursor
keys
to
move
between
the
hour
and
minutes
setting.
JUL“2971994 FRI
$:00rRaWORK
ALM 7:245A
a
Time data
Schedule alarm
indicator
_¢
You
can
skip
this
input
if
you
want
the
schedule
alarm
time
to
be
the
same
as that for the schedule data time.
e
Whenever
the
schedule
alarm
setting
is
shown
on
the
display,
pressing
DEL
clears
the
alarm
time
and
displays
the
prompt
“ALM
TIME?”
Input
the
aiarm
time
using
the
same
procedure
described
above.
4.
After
inputting
the
data,
press
SET
to
store
it
into
memory.
e
Note
that
the
schedule
alarm
setting
is
cleared
from
the
display
when
you
press
SET.
Using the Schedule Keeper So
« If you attempt to set a schedule alarm time that is already passed, the
_message “ALARM TIME ALREADY PASSED!” appears on the display.
Then the data is stored without a schedule aiarm,
e Ifyou attemptto seta schedule alarm time thatis already set for another data
entry, the message “ALARM TIME ALREADY USED!” appears on the
dispiay. Press ESC, [> or <J to display the schedule alarm to change it.
To switch schedule alarms on and off
1. Press FUNC.
2. Press 4 to select the SOUND menu item.
3. Use A and V to select SCHED AL.
4. Use <l.and > to switch Schedule Alarm on and off.
5. Press SET to store your setting and clear the SOUND menu.
To set or change a schedule alarm for an existing data entry
1. Enter the Schedule Keeper and recall the data for which you want to set or
change a schedule alarm. And then press FUNC 7 io enter the
edit mode.
Press [> unti! the schedule alarm time appears.
Input the schedule alarm time. Use the <] and > cursor keys to move
between the hour and minutes setting.
Whenever the schedule alarm setting is shown on the display, pressing DEL
clears the alarm time and displays the prompt “ALM TIME?". Input the alarm
time using the same procedure described above.
After inputting the data, press SET to store it into memory.
Note that the schedule alarm setting is cleared from the display when you
press SET.
aed
-
To view a data entry's current schedule alarm setting
1. Enterthe Schedule Keeper and recall the date whose schedule alarm setting
you want to view.
Press SHIFT NEXT to switch the index display to show the schedule alarm:
settings for all entries stored under the date you are viewing.
. Use A and V to scroll through the entries and view the alarm times.
To clear the schedule alarm times, press SHIFT NEXT again.
ed
wo

Casio SF-4300B Specifications

General

Brand	Casio
Model	SF-4300B
Category	Organizer
Language	English