Need help?Do you have a question about the CASMED 740 and is the answer not in the manual?
Overview of the CASMED 740 Monitor's capabilities including NIBP, pulse oximetry, and temperature measurement.
Details the monitor's portability, power options, language settings, and message window functionalities.
Defines the recommended patient environment and lists system parts used within it.
Provides revision history for the service manual, detailing changes across different versions.
Specifies that the manual is intended for service representatives and technical personnel.
Explains the meaning of WARNING, CAUTION, IMPORTANT, and NOTE in the context of the manual.
Refers users to the Vital Signs Monitor User's Manual for operational knowledge.
Lists various models of the CASMED 740 monitor and their respective parameter configurations.
Details the warranty terms and conditions for the CASMED 740 Monitor and its accessories.
Information on the availability and terms of an extended warranty for the CASMED 740 Monitor.
Procedure for returning the monitor for repair, including obtaining an RMA number.
Covers general safety guidelines, suitability for electro surgery, and automatic safety functions like cuff deflation.
Illustrates the front panel views of the CASMED 740 monitor with English text and symbols.
Describes the function of various LEDs and display elements on the monitor's front panel.
Details the functions of specific pushbuttons and controls on the monitor's front panel.
Explains the function of the IR output port for printing data to external devices.
Diagrams showing the rear panel connections for SureTemp® and SureTemp® Plus models.
Illustrates the left side panel connections for Masimo/Nellcor and Nonin SpO2 configurations.
Shows the right side panel view, including temperature probe holder locations.
Instructions for entering the configuration menu and saving changes made to monitor settings.
Displays the current software revision of the operating system and internal modules.
Guide to selecting the operating language from nine available options.
Procedure for choosing between Neonate and Adult patient modes, affecting default limits.
Option to configure the delay time before the monitor display turns off.
Instructions for choosing between Celsius and Fahrenheit for temperature readings.
Configuration of 2-Minute or Permanent Audio Alarm Silence, or disabling alarms.
Option to display or hide the Mean Arterial Pressure (MAP) value and associated alarms.
Setting the delay time for SpO2 and Pulse Rate alarms.
Procedure for setting the monitor's date and time values.
Configuration for automatic adjustment to Daylight Saving Time based on region.
Details interfacing capabilities with external serial printers and Nurse Call systems via DB9 connector.
Explains the isolated relay output for Nurse Call Systems and connection details.
Guidelines for cleaning the monitor, display, cuffs, tubing, printer, and cables.
Instructions for cleaning temperature probes and the probe well, including cautions.
Procedure for performing pneumatic system checks, including plug tube and cylinder tests.
Details required safety and system checks performed by qualified technicians.
Recommendations for battery replacement and storage guidelines to maintain charge capacity.
Presents an overall block diagram of the CASMED 740 monitor for system troubleshooting.
Flowchart guiding users through diagnosing and resolving 'No Monitor Power' issues.
Diagnoses common issues encountered during the monitor's power-up sequence.
Troubleshooting steps for 'No SpO2 Response' issues, focusing on probe compatibility and function.
Diagnoses problems related to the temperature measurement function and potential module failures.
Explains the functions of the main control board, supervisor microcontroller, and DSP controller.
Lists and explains various error messages displayed by the monitor during operation.
Outlines tests for performance verification after repairs or during routine maintenance.
Procedures for fully charging the battery and verifying the monitor powers on correctly.
Steps to verify the correct setting of the monitor's time and the range of alarm audio.
Procedure to verify the audio range for the SpO2 volume.
Tests to verify system operations like LED checks, power supply, and calibration.
Guides for performing system pressure, overpressure, and pneumatic pressure checks.
Procedures for NIBP, Oximetry simulator checks, and electrical safety tests like leakage and hypot.
A template for recording test results to verify monitor performance.
Overview of service procedures and lists of necessary tools and miscellaneous items.
Step-by-step guides for replacing the battery, fuses, power supply, NIBP, SpO2, and temperature modules.
Procedures for replacing the main control board, front panel keyswitch, and various interface boards.
Specific procedures for replacing interface boards within the SureTemp Plus module.
Indicates that the NIBP board is not user serviceable and no schematic is provided.
Detailed schematics for the Main Control Board, SureTemp® model, across multiple pages.
Detailed schematics for the Main Control Board, SureTemp® Plus model, across multiple pages.
Schematic diagram for the Temperature Interface Board.
Schematic diagram for the Nonin Interface Board.
Schematics for the RS 232/Nurse Call Interface Board (Pages 1 of 2).
Schematics for the RS 232/Nurse Call Interface Board (SureTemp® Plus) (Pages 1 of 3).
Schematic diagram for the DC Converter Board.
Notes that schematics for proprietary boards are not included due to their nature.
List of available printed circuit boards with their part numbers and descriptions.
List of spare switches, controls, and connectors with part numbers.
List of spare cables with their part numbers and descriptions.
List of miscellaneous spare parts, including cases, fuses, and calibration keys.
Details NIBP measurement technique, patient range, pressure/pulse rate ranges, and accuracy.
Provides specifications for Nonin®, Masimo SET®, and Nellcor® OxiMax® SpO2 sensors.
Specifies the temperature range and accuracy for the optional temperature module.
Defines neonatal and adult alarm limit ranges for SYS, DIA, MAP, and Pulse parameters.
Describes the LED display, parameters shown, and signal strength bar.
Details automatic cuff deflation triggers based on pressure, time, or microprocessor failure.
Outlines the operating modes for patient, NIBP, history, SpO2, and temperature functions.
Details power sources (AC/Battery), fuse ratings, charge time, and battery operation duration.
Describes key features like self-test, auto zero, inflation, deflation, and max measurement time.
Specifies the recommended operating temperature, humidity, and altitude ranges.
Defines acceptable temperature, humidity, and altitude ranges for storage and transport.
Provides the physical dimensions and weight of the CASMED 740 monitor base unit.
Details interface parameters for bi-directional serial communication (speed, data length, parity).
Specifies relay contacts, switch power, and maximum delay for the nurse call interface.
Lists optional accessories available for the CASMED 740 monitor.
Lists standards and directives the unit complies with, and registered trademarks.
To Next Page
General