Need help?Do you have a question about the Castles Technology VEGA5000S and is the answer not in the manual?
General| RAM | 1GB |
|---|---|
| Processor | Quad-core 1.3 GHz |
| Storage | 8GB |
| Operating System | Android |
| Connectivity | 4G, WiFi(2.4G/5G), Bluetooth 4.0 |
| Memory | 1GB RAM |
| Camera | 5MP rear camera |
| Battery | 3000mAh |
| Certifications | EMV L1&L2 |
| Payment Options | Magnetic stripe, Contactless |
| Supported Cards | Visa, Mastercard, AMEX |
Describes the portable and countertop types of VEGA5000S terminals and their differences.
Identifies and describes the physical components of the VEGA5000S terminal, including front, rear, and side views.
Provides step-by-step instructions for inserting the battery into the terminal.
Details the process and correct orientation for inserting a SAM card into the terminal.
Explains how to load a paper roll and specifies paper dimensions.
Guides the user on inserting a GSM SIM card, including correct orientation.
Instructs on inserting a Micro SD memory card and its orientation.
Explains how to manage applications, select, run, and configure them via the Program Manager.
Details the process for downloading user applications or kernel modules to the terminal.
Describes how to view kernel module firmware information and system details.
Shows how to check the terminal's flash memory and RAM status.
Covers viewing and modifying various terminal system configuration settings.
Outlines procedures for performing hardware component diagnostics.
Explains how to perform a factory reset, clearing all data and applications.
Provides instructions on how to safely power off the terminal.
Details the process for changing the function key access password.
Explains how to view shared libraries and files on the terminal.
Covers connecting to and managing TMS configurations for the terminal.
Shows how to view the ULD user keyset hash value.
Introduces the ULD Key System for securely managing kernel and application updates.
Details the process of signing files using CAP Signing Tool and CAP Generator.
Describes various methods for loading files, including User Loader and removable media.
Guides on how to load new fonts into the terminal using FontManager.
Details the process of creating and customizing fonts for the terminal.
Explains how to use TrueType Fonts (TTF) on the VEGA5000S terminal.
Introduces the GNU Project Debugger (GDB) for developing and debugging programs on the terminal.
Provides instructions on configuring system settings for GDB debugging.
Guides on how to start and perform debugging sessions using GDB.
Offers general advice and important considerations for operating the VEGA5000S terminal.
To Next Page
