CAT B15 - Wi-Fi; Connecting to a Wireless Network; Browser

CAT B15 Smartphone User Manual
20
Turning on the Data Service
1. Touch > Settings ( ).
2. In WIRELESS & NETWORKS, touch More > Mobile networks > Data connection.
3. Touch the desired network operator to enable the data connection.
Wi-Fi
Wi-Fi gives you wireless access to broadband Internet access. To use Wi-Fi on your mobile
phone, you need to have an access to wireless access points (hotspots). Obstacles that
block the Wi-Fi signal will reduce its strength.
Turning On Wi-Fi
1. Touch > Settings ( ).
2. In WIRELESS & NETWORKS, touch Wi-Fi and set it to ON.
Connecting to a Wireless Network
1. Turn on Wi-Fi.
2. A list of detected Wi-Fi networks will be displayed in the Wi-Fi networks section. Touch a Wi-
Fi network to connect to it.
3. If you select an open network, you will be automatically connected to the network. If you
SELECTÒAÒNETWORKÒTHATÒISÒSECUREDÒANDÒCONNECTÒTOÒITÒFORÒTHEÒµRSTÒTIMEÒENTERÒTHEÒPASSWORDÒANDÒ
then touch Connect.
Note:
If you connect to a secured wireless network that you have already used, you will not be prompted
to enter the password again unless you reset your mobile phone to its default settings.
Tip: On the Wi-Fi settings screen, touch
to add a new Wi-Fi network.
Browser
Your mobile phone comes with a browser. You can use Browser to access and browse the
Internet.
Opening Browser
To open the application, do one of the following:
jÒ Touch
on the Home screen.
jÒ Touch
> Browser ( ).
Opening a Web Page
Ò)NÒAÒBROWSERÒWINDOWÒTOUCHÒTHEÒ52,ÒµELDÒATÒTHEÒTOPÒOFÒTHEÒSCREEN