CAT B25 - 13.3.2 Number; 13.4 Using the keypad; 13.5 Symbol

Cat B25 Phone User Manual
21
13.3.2 Number
Refer to the table below for key definitions in this mode.
For this input method, the keypad is defined as below.
Key name Corresponding character or function
Number key “1” 1
Number key “2” 2
Number key “3” 3
Number key “4” 4
Number key “5” 5
Number key “6” 6
Number key “7” 7
Number key “8” 8
Number key “9” 9
Number key “0” 0
# key Change the input method
Up key Move the cursor upward
Down key Move the cursor downward
Left key Move the cursor leftward
Right key Move the cursor rightward
Left soft key Ok
Right soft key Back or Clear
End key Return to the standby mode
€13.4 Using the keypad
For general operations, refer to the part below.
• PresstheNumberkey(0-9)toenterthecorrespondingnumber.
• Tochangeaninputmethod,press#key.
• Todeletewronginputs,presstheRightSoftkeytoselectClear.Pressandholdittodelete
all.
13.5 Symbol
Using the keypad: To access the symbol box during editing mode, press * key. To select your
required symbol, press the navigation keys. Then, press Ok to confirm.