Assembly Instructions
Model 63036
The Big Work Center
GENERAL:
1. You have purchased model 63036.
2. Should you need assistance or need to replace a damaged or missing part simply give us a call M-F at
607-652-7321 from 7:30 am - 4:30 pm EST and we’ll send you the prepaid part via UPS usually that same day!
You may also email us info@catskillcraftsmen.com.
3. Read the assembly instructions and the enclosed brochure before beginning assembly. Assembly is easy
if you read and follow the instructions step by step. Assembly instructions are described as you are facing an
upright assembled cart.
4. Tools required: hammer, a small and a medium Phillips head screwdriver and medium at blade screwdriver.
A pencil is also needed. A power screwdriver will speed assembly, but is not required.
5. See our website www.catskillcraftsmen.com for assembly video on this model.
NOTE: one change to the video: use 5/8” #8 pan head screws to attach glides to the drawer and cabinet
To Next Page
Need help?
General