cavitation RF SUPER - Lipolaser Operation Steps

Cavitation RF SUPER
13
Operation:
Lipolaser
1.set the treatment time :
Touch to ajust the treatment time from 5 to 30 mins,(preset time:20 mins).
2.Set the laser mode :
Touch to ajust the RF mode among Auto,M1,M2,M3 modes.
3.set the laser power :
Touch to ajust the cavitation power level from 10% to 100% .
4.Touch any plaser pad to select the it to work
4.:touch it to start the treatment after all the parameter ajusted.
5.Pause button :touch it to pause the treatment,if need to change working mode,power
or treatment time during treatment,please touch it firstly,then change the
parameters.
6.Back button :touch it to return to the main function interface,it would be touched after
touching the pause button .