CHARGING
USER GUIDE
Press the button 5 times to power on/off. While the device is on, draw
from the mouthpiece to activate.
The inhale protection function will cut off any session over 10 seconds.
Remove the cartridge before charging.
Charge the device with a 510 thread USB charger. A full charge takes
approx. 60min.
To avoid residue build-up, remove cartridge when not in use.
2.8V: Optimal for high terpene extracts such as live resin or rosin for
truer-to-taste flavors.
3.2V: Happy medium for both vapor and flavor.
3.6V: Delivers thicker vapors to satiate your cravings.
Screw the cartridge onto the battery.
Press the button 3 times to switch between voltage settings.
HEAT ADJUSTMENT
2.8V 3.2V 3.6V
Charging temperature: 50-113°F (10-45°C)
Working temperature: 14-140°F (-10-60°C)
The LED light will blink during charging; when the device is fully
charged, the LED light will turn to a steady green.
Do not leave the device charged unattended or overnight.
OPERATING CONDITIONS
To Next Page
Loading...