E, Set the Daily Start Time for Spraying:
You can use the device's function to set the start and stop time for the spraying day. For
example, if the office working hours are from 9:00 to 17:00, you can set the start time of
the spraying machine to 9:00 and the stop time to 17:00. This ensures that the machine
sprays during the staff working hours.
1, Set the hour
Press the "Mode" button once, then press the "Enter" button 12 times. The "ON"
and hour on display will flash together.
Press the "Adjust" button to set the desired hour for the start of daily spraying.
Wait for 8-9 seconds for the setting to complete.
2, Set the minutes
Press the "Mode" button once, then press the "Enter" button 13 times. The "ON"
and minutes on display will flash together.
Press the "Adjust" button to set the desired minutes for the start of daily spraying.
Wait for 8-9 seconds for the setting to complete.
F, Set the Daily Stop Spraying Time:
1, Set the hour
Press the "Mode" button once, then press the "Enter" button 14 times. The "OFF"
and hour on display will flash together.
Press the "Adjust" button to set the desired hour for the end of daily spraying.
Wait for 8-9 seconds for the setting to complete.
2, Set the minutes
Press the "Mode" button once, then press the "Enter" button 15 times. The
"OFF" and minutes on display will flash together.
Press the "Adjust" button to set the desired minutes for the end of daily spraying.
Wait for 8-9 seconds for the setting to complete.
INSTALLATION
1. Press the button located on the top of the dispenser to open the lid. Refer to Figure
A for visual guidance.
2. Remove the refill bottle from the dispenser, pressing the snap mechanism and this
will detach the spray timer from the dispenser. Refer to Figure B for visual
guidance.
3. For wall-mounted installation:
a. Use a pen to mark the screw(traceless sticker screw) positions on the wall.
b. Securely fix the housing to the wall using the provided screw (traceless sticker
screw). Refer to Figure C for detailed instructions.
4. After removing the spray timer, it’s easy to insert 3 AA batteries for power. Refer to
Figure E for detailed instructions.
5. Fill the refill bottle with your preferred liquid fragrance spray. Please refer to Figure
E for detailed instructions.
6. Place the spray timer back into the dispenser, ensuring that it securely snaps into
place. Reinsert the refill bottle into the dispenser, Refer to Figure F for visual
guidance.
7. To test the functionality, press the "TEST" button multiple times until the nozzle
sprays the liquid normally.
8. Congratulations! You have successfully completed the setup.
To Next Page
Loading...