Need help?Do you have a question about the CDVI STARPB and is the answer not in the manual?
General| Operating temperature | -20°C to +60°C |
|---|---|
| Ingress Protection | IP65 |
| Technology | Proximity |
| Frequency | 125 kHz |
| Material | ABS |
| Output Format | Wiegand |
Details dimensions, technology, input voltage, and consumption of the readers.
Covers available colors, connection types, and feedback mechanisms.
Advises on varistor installation, power supply, and cable types.
Recommendations for humid areas and seaside environments.
Steps for reader positioning, drilling screw holes, and wiring access.
Guidance on correctly applying the foam seal to the reader's back.
Instructions for inserting plugs, connecting cables, and securing the reader.
Steps for reader positioning, drilling screw holes, and wiring access.
Guidance on correctly applying the foam seal to the reader's back.
Instructions for inserting plugs, connecting cables, and securing the reader.
Details for SOLARPW/SOLARPB and STARPW/STARPB terminal blocks and cables.
Configuration for Wiegand formats, anti-passback, and voltage selection.
Explains power-up behavior, operating modes, and LED status.
Details the 26-bit Wiegand format and its components.
Explains the logic for calculating parity bits in the 26-bit format.
Details the 30-bit Wiegand format, including parity.
Explains the 44-bit Wiegand format, data, and LRC calculation.
Configuration options for Red and Green LED behavior in the Centaur system.
Software settings for activation time, anti-passback, and door states.
To Next Page
