34
GB
Press to confirm. The display will show:
Press the button or to set the function “Thermal control” or “Continuous ventilation”. Press
the to confirm. Exit the settings menu.
Extra shot setting
Hold down the button for 3 seconds to enter the settings menu. Then press the button or
until this screen is displayed:
Press to confirm. The display will show:
or
Press the button or to enable/disable the "extra shot" feature.
When the extra shot is enabled, the corresponding LED (see Fig. 3) remains on.
Press the to confirm. Exit the settings menu.
Leaving the settings menu
To leave the settings menu and return to READY status, press the button six times until this
screen is displayed:
Press the button to confirm.
To Next Page
Loading...
