GB
28
To set the time for the single shot press . The display will show the currently set time:
Press the button or to change this time with a precision of 0.1 seconds, then confirm your
choice with the button . If no button is pressed for 10 seconds, no change will be made.
Note: The minimum settable time is 0.1 second while the maximum, for the single shot, is
99.9 seconds.
Double shot
To change the grinding time for the double shot, you have to enter the settings menu and, when the
display shows:
Press the button once. The display will show:
At this point, by pressing the button you can set the grinding time for the double shot, in the
same was as explained above for the single shot.
Note: The minimum settable time is still 0.1 second while the maximum, for the double shot, is
99.9 seconds.
Leaving the settings menu
To leave the settings menu and return to READY status, when you are on one of the two screens
for setting the shot time:
or
press the button until you see:
Press the button to confirm.
Exit
Use button + -
t. single 2.0
Set time
single shot
Set time
double shot
Set time
double shot
Set time
single shot
To Next Page
Loading...
