Ceado ES300 - User Manual

Questions and Answers

M
Mr. Scott SandersAug 8, 2025
What to do if my Ceado Kitchen Appliance does not turn on?
- D
  David EllisAug 8, 2025
  If your Ceado Kitchen Appliance doesn't turn on, there are several things to check. First, ensure the feed chute is empty and the appliance is properly plugged in. Verify that the safety circuit breaker is closed and the locking arm is correctly hooked onto the juicer cover. If the issue arises after intensive use or overfilling, the motor might be in thermal protection lock. If that is the case, wait at least 20 minutes before trying again. You can reduce the waiting time by placing the appliance in a cooler environment.
P
Phyllis MurphyAug 12, 2025
Why is the pulp excessively wet and juice low in my Ceado ES300 Kitchen Appliances?
- L
  Logan McdowellAug 12, 2025
  If you notice that the pulp from your Ceado Kitchen Appliance is excessively wet and the juice yield is low, try inserting the fruits or vegetables more slowly and with less force. Ensure the basket is thoroughly cleaned with a nylon brush under running water, checking for any blockages against the light. If blockages persist, soak the basket in a hot water solution with 12% lemon juice or vinegar to loosen the material, or alternatively, wash it in a dishwasher. Also, consider that overly ripe fruit can contribute to this issue.
M
Melinda WilliamsAug 17, 2025
How to fix abnormal vibrations in Ceado ES300 Kitchen Appliances?
- E
  erin83Aug 17, 2025
  If your Ceado Kitchen Appliance is vibrating abnormally, check the basket alignment and correct its positioning if it's incorrect. Inspect the structural components of the basket for any deterioration and replace them if needed. Also, check for any pulp accumulation in the basket and empty it if necessary. Note that a full container can also cause vibrations.
C
Connor AndrewsAug 21, 2025
What to do if juice doesn't come out of my Ceado ES300?
- E
  Emily CooperAug 21, 2025
  If juice isn't coming out of the spout of your Ceado Kitchen Appliance, first check the basket for any blockages and clean it thoroughly. Also, inspect the opening of the spout itself for blockages and clean both the bowl and spout. The use of overly ripe or pulpy fruits can also cause this issue, so remember to check and clean the bowl and basket.
R
randywalshAug 26, 2025
Why is my Ceado Kitchen Appliance vibrating abnormally?
- S
  snyderjohnAug 26, 2025
  Abnormal vibration in your Ceado Kitchen Appliance can be due to several reasons: * Incorrect basket positioning: Check the alignment of the basket. * Deterioration of basket components: Inspect the basket for any damage and replace it if necessary. * Pulp accumulation: Check for and remove any accumulated pulp in the basket.
K
Kayla WalkerAug 29, 2025
How to fix wet pulp and low juice yield in my Ceado Kitchen Appliances?
- A
  austinbyrdAug 29, 2025
  If you're experiencing excessively wet pulp and a low juice yield with your Ceado Kitchen Appliances, consider the following: * Try inserting fruits or vegetables more slowly and with less force. * Ensure the basket is thoroughly cleaned with a nylon brush. * Clean the inside of the strainer by putting the basket under running water and using a brush. * If perforations are blocked, soak the basket in hot water with 12% lemon juice or vinegar to loosen the blockage. Alternatively, wash the basket in a dishwasher. Also, avoid using overly ripe fruit.
J
Jonathan McmillanSep 3, 2025
What to do if juice isn't coming out of my Ceado ES300 Kitchen Appliances spout?
- M
  Michael WilliamsonSep 3, 2025
  If juice isn't dispensing from the spout of your Ceado Kitchen Appliances, it could be due to a blockage. Check and clean the basket, the bowl, and the spout to ensure they are free of obstructions. Also, the issue might be related to using fruit that is too ripe or has too much pulp; if so, clean the bowl and basket.

Ceado ES300 Specifications

General

Type	Espresso Grinder
Burr Type	Flat
Burr Diameter	64 mm
Grind Settings	Stepless
Power	300 W
RPM	1400
Feed chute diameter	58 mm
Motor Power	300 W
Grinding Disc Diameter	64 mm
Voltage	220-240 V

Related product manuals