cecotec Bake & Toast 570 4Pizza - Operation

18 | BAKE&TOAST 570 / 610 4PIZZA
ENGELSK
How to use the tray handle
Fig. 2
Adjusting rack and trays level
The wire rack and the tray’s position can be adjusted to 3 dierent positions
according to the dish that is going to be cooked. For example, when cooking
macaroni, if you want to brown the top part, place the wire rack in the top
part. For roasting chicken, use the middle part.
Fig. 3
Warning
Before using the oven for the rst time, heat the oven while empty following
the instructions below:
Introduce the baking tray and the wire rack in the oven.
Turn the function knob to “Upper & Lower” and turn the temperature knob
to 230 ºC. Heat the oven for 10 minutes.
A strange odour and smoke might appear during the rst use due to
manufacturing wastes.
3. OPERATION
Temperature control
Fig. 4
Select the desired cooking temperature, according to the food that is going
to be cooked, by turning the temperature knob clockwise. The temperature
can be adjusted from 90 ºC to 230 ºC.
Select “Upper” or “Upper and lower” according to the dishes you are going
to cook. You can check whether the heaters are working or not by observing
the front indicator light.
Function selector
Fig. 5
Each of the functions will activate and combine dierent heating elements.
Select the function that suits the type of food to be cooked:
1. Upper heating
2. Lower heating Upper heating
3. Upper & Lower heating
4. Upper heating + Convection function
5. Lower heating + Convection function
6. Upper & Lower heating + Convection function
Timer