cecotec Bamba PrecisionCare Wet&Dry - Page 29

Bamba PrecisionCare Wet&Dry27
ENGLISH
Output power W Nameplate output power.
In case more than one
physical output or more
than one output voltage is
the available sets of output
voltage output current
and output power shall be
published.
Declared by the
manufacturer on the basis
of the value calculated as
the arithmetic mean of the
1-4. In cases where multiple
are declared for multiple
output voltages available
published value shall be the
declared for the lowest
output voltage.
-- Declared by the
manufacturer on the basis
of the calculated value in
power supplies with a rated
output power of 10 W or less
shall be exempt from this
multiple active average
multiple output voltages
available at load condition
be the value declared for the
lowest output voltage.
No-load power
consumption
W Declared by the
manufacturer based on the
value measured for load
condition 6.
04333_Bamba PrecisionCare Wet&Dry_IM_EA02230714.indd 42 28/7/23 14:21