cecotec CECOFRY ADVANCE DOUBLE - Advanced Cooking Features; Right Basket Operation

CECOFRY ADVANCE DOUBLEL
55
ENGLISH
14. Synchronisation
- This function is useful when you have set dierent cooking times on the baskets and you
wish them to nish at once. With this function, if in the left basket you have selected 20
min and in the right basket you have selected 10 min, it will start the cooking process in the
right basket 10 minutes after so both cooking processes nish at once.
- To programme this function, select rst the left basket (13) or right (17), then the desired
programme (10) or the desired time (9) and temperature (11). Press the ‘Sync’ icon (14) and
it will stop ashing. Next, press the Start/Pause icon (12).
Note
- When this function starts the basket with less time programmed will enter standby mode
and the display will show ‘Hold’ until there is no time dierence between them.
- If you remove any basket when the device is operating: the display will show ‘Pot’ if you
remove the left basket and ‘Out’ if you remove the right basket, if you remove both baskets
it will show ‘Pot Out’. If it takes you more than 90 seconds, but less than 5 minutes on
placing the removed basket, the basket you have removed will resume the cooking
process. When you place the basket back in place, the device will resume the cooking, but
the synchronisation function will be deactivated.
15. Preheating
- With this function, you will start preheating the selected basket, that is, either the right or
left basket or both baskets.
- To select this function, select rst the basket (13, 16 or 17) you wish to use, then select the
preheating function (15) and set the desired preheating temperature (11). The preheating
time is 5 minutes by default, but if you wish to cancel it at any time, press the power button
(8).
- Once the preheating has nished, press the icons 13 or 17, depending on the preheated
basket, and press the programme (10) or set the desired time (9) and temperature (11)
manually and next, press the Start/Pause icon (12).
16. Same conguration on both baskets L=R
- This function is used to use the same cooking process on both baskets, that is, if you press
this icon and then the chips programme, this setting will be activated on both baskets.
- To use it, rst select one of the baskets (13 or 17) and set the desired time (9) and
temperature (11) or programme (10) and then press this function (16). Next, press the
Start/Pause icon (12) to start cooking.
17. Right basket
Use this icon to set only the right basket. Press the icon (17), select the desired time (9) and
temperature (11) or programme (10). Then, press the Start/Pause icon (12) to start cooking.