cecotec CONGA 2299 INERTIAL X-TREME - Edge mode; Back Home mode; Manual mode; Power level function

CONGA 2299 INERTIAL X-TREME
53
ENGLISH
the same point where it started cleaning.
3. To activate this mode, press the spiral cleaning button on the app.
Edge mode
When this mode is selected, the robot vacuum cleaner will clean along walls and around
furniture (e.g., table or chair legs).
Press the edge cleaning button on the app.
Back Home mode
Press the Back home button on the robot vacuum cleaner or on the app (with a house icon)
to send the robot to the charging base. The robot vacuum cleaner will stop vacuuming until it
reaches the base.
Manual mode
Select the manual cleaning mode on the app to steer your robot vacuum cleaner manually.
Power level function
Select the power level on the app to control the robot vacuum cleaner’s suction power during
cleaning. There are 3 power levels: Eco, Normal, and Turbo.
Cleaning scheduling
To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
5. CLEANING AND MAINTENANCE
High-eciency lter. Fig. 8.
- The high-eciency lter is designed with bres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the lter, to prevent these particles
from building up in the lter, causing eciency loss. It is convenient to carry out this
maintenance once a week.
- It is recommended to replace the high-eciency lter with a new one without exceeding
160 cleaning hours.
Recommendation
You can remove dirt from the high-eciency lter with a small brush or gently shake the lter
on a hard surface to remove the dust. The high-eciency lter cannot be washed.