4. BEFORE USE
Note: before using the device for the rst time, make sure to remove any label or protective
sheet which affects its proper functioning.
• Remove any packaging material.
• Make sure the appliance is switched off and disconnected from the power supply before
installing or assembling it.
• The appliance must be used with its base tted.
• Install the water tube connector on the front grid and use the screws to x it tightly.
• Put the front and back grid together, join them with the help of the screw-type sealing
ring and close it with the fastener.
• Place the fan on a dry and stable surface and insert the plug on the power supply. The unit
will emit a short “BEEP” sound indicating it is properly connected. For your convenience,
the unit can be operated by using the control panel in the main body or by using the re-
mote control provided.
5. OPERATION
WARNING: Make sure the product is unplugged from the power supply before lling or relling
the water tank.
• Only use water in the water tank. Do not add any chemicals, oils or other substances.
• Only use cold or lukewarm water in the water tank. Water used must not be warmer than
40°C.
CONTROL PANEL AND REMOTE CONTROL
1
2
4
6
3
8
7
5
1. On/off button
2. Speed button
1
2
3
4
5
68 7
05229_ForceSilence 790 Freshessence Ionic_Manual_DS.indd 17 14/12/18 14:16
To Next Page
Loading...
Need help?
General