38
ENGLISH
Fig. X
Place a container.
Fig. Y
Pour in grinder cleaning product.
Fig. Z
Install the brewing unit.
Fig. K
5. CLEANING AND MAINTENANCE
Disconnect the power cord from the wall socket before cleaning. Do not immerse the product
in water or any other uid during cleaning.
Use a soft, dampened cloth to clean the outer part of the device.
Failure to maintain the product in clean conditions could lead to surface deterioration and
could adversely affect the product’s shelf life, resulting in possible hazard.
Never use strong detergents, gasoline, abrasive powder or metal brush to clean any part of
the product.
Store the machine in a safe, dry and clean place if it is not going to be used during long periods.
Clean both the visible parts of the machine and the area beneath it in order to remove all
residues.
Cleaning of the steam tube (1)
Insert the transparent tube into the steam tube.
Place the the other tube’s end inside a glass of water and place another one below the milk
dispenser.
Press the MILK icon to start cleaning.
Once the process has nished, empty the container and repeat the process until no milk rests
are observed.
Fig. 33
Cleaning of the steam tube (2)
Press both sides of the steam tube and take it out from the coffee spout.
Introduce the steam tube in a glass of clean water.
Introduce the cleaning brush 2 or 3 times in the holes located on the steam tube’s back part
to clean them.
Insert the steam tube back in the device.
Fig. 34
Note: the device will notify you when this process is necessary.
Cleaning of the steam tube (3)
When the screen displays “Milk cleaning system”, press OK. This message will be displayed
To Next Page
Loading...
