- Always turn off and disconnect the appliance from the
power supply before assembling,disassembling, cleaning it
or if it is not going to be used for a long period of time. Pull
from the plug, not the cord, to disconnect it from the outlet.
- Do not immerse the cord, plug, or any non-removable part
electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the appliance.
- Do not touch the product’s surface that could reach high
temperatures. Use the handle provided.
- Do not use accessories not provided or suggested by Cecotec,
as these could cause damage to the product or result in risk.
- Do not twist, bend, strain, or damage the power cord in any
way. Protect it from sharp edges and heat sources. Do not
let it touch hot surfaces. Do not let the cord hang over the
edge of the working surface or countertop.
- Do not use near a gas or electric hob, in heated ovens or near
- Extreme caution must be taken when moving appliances
- Always turn the appliance off and disconnect it from the
power supply before changing accessories or approaching
moving elements.
- Do not introduce any utensil inside the product during
operation in order to reduce risk of injuries to persons or
damage to the product. A scraper may be used while the
product is paused.
- Make sure to keep the measuring lid in its position when
- Do not use the product if its blade is curved or damaged.
- Do not operate the appliance empty.
- Make sure the accessory that is going to be used is properly
To Next Page
Loading...
Need help?
General
