EasyManua.ls Logo

Celestron NexGO DX KIT - Page 7

Celestron NexGO DX KIT
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 | ENGLISH INSTRUCTION MANUAL
UNIVERSAL SMARTPHONE ADAPTER AND BLUETOOTH REMOTE
NEED ASSISTANCE? Contact Celestron Technical Support
celestron.com/pages/technical-support
Product design and specifi cations are subject to change without prior noti cation.
This product is designed and intended for use by those 14 years of age and older.
©2024 Celestron. Celestron and Symbol are trademarks of Celestron, LLC.
All rights reserved. • Celestron.com
US: Celestron, 2835 Columbia Street, Torrance, CA 90503 USA
UK: Celestron Global Ltd., Unit 2 Transigo, Gables Way, Thatcham RG19 4JZ, United Kingdom
Made in China | 09-24
celestron.com/pages/warranty
SAFETY INSTRUCTIONS
There is a risk of explosion if the battery is replaced with an incorrect type.
The included battery is not rechargeable.
Only use the battery as originally intended to avoid a short circuit. Connecting the conductive
material directly to the battery’s positive and negative sides will cause a short circuit.
• Do not use a damaged battery.
Do not store the battery in an extremely cold or hot environment. Doing so can reduce
battery life.
Remove batteries if drained or if product is to be left unused for a long time.
When replacing the battery, refer to the instruction manual and ensure the positive and
negative sides are oriented correctly.
Do not put the battery in fi re.
Dispose of the battery according to local regulations.
SOLAR WARNING: Never attempt to view the sun through any telescope.
FCC IDENTIFIER: 2A2FG-93974
NOTE: FCC certifi cation is for the Bluetooth Remote Control included with this product. Model # 93974
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
CAUTION: Changes or modifi cations not expressly approved by the party responsible for compliance could void the users
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Related product manuals