BIO X6 User Manual v. 1.0 72
6. Preview: A preview of the printing progress is displayed here.
7. Pause print: Tap to pause the bioprinting process. When the process is paused, tap
to resume the bioprinting process.
8. Restart print: Tap to restart the print. This feature can be used to print the same
model by using the same parameters and print surface as the previous print.
9. Manual photocrosslinking: Tap to perform manual photocrosslinking on your final
constructs. You can select wells, the wavelength, the distance from the printbed and
the time.
10. Save protocol
extension.
11. Finished: Tap to finish the current print and go to the home screen.
To Next Page
Loading...
