BIO X6 User Manual v. 1.0 9
1 Safety information
Review the entire manual, as well as the manuals for any accessories, before
using the BIO X6. Mishandling can lead to equipment damage and severe
injury. The following symbols are used to indicate risk of equipment damage or
personal injury:
This symbol indicates risk of injury or equipment damage.
This symbol indicates a heated surface. The BIO X6 has heated surfaces that
may cause personal injury or equipment damage if not treated with care. A
physical symbol labels these surfaces on the BIO X6, and the symbol appears
on the BIO X6 touchscreen when the print chamber is heated.
This symbol indicates the presence of UV light. Keep the door closed and wear
proper safety attire during UV sterilization and UV curing. This symbol appears
on the screen when a UV light source is active.
Manufacturer
Cellink Bioprinting AB
Långfilsgatan 7
412 77 Gothenburg Sweden
To Next Page
Loading...
