EasyManua.ls Logo

Cello Puro - Important Notes and Specifications; Operating Notes; Technical Specifications

Cello Puro
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Notes:
1. Make sure the water level covers the pump, but fill the fountain with water till the lower
edge of the opening.
2. Position the solar panel in full sun to optimally run the pump, the backup battery will be
charged from the solar panel during normal operation and automatically run the pump
without sunshine.
3. If required the pump can be run by the battery in times of the sun no visible. Turn on
the switch at located at the back of the solar panel, if the battery
is fully charged the
pump will start to work immediately.
4. If the switch is turned o, the pump will be operated by the solar panel only.
5. If there is no water, disconnect the pump from the battery and solar panel, nnming the
pump dry will reduce the life of the pump.
6. When there is no sun,panel charged previously will power the fountain water&light for
a minimum of a few hours.In the circumstances of a period of time with No Sun,it will Not
work due to battery char
ged consumption being used up.
7. If the fountain is not used or before transport,please disconnect pump from the
battery.Periodically clean the pump filter.8.Battery is NONE replaceable(LI,7.4y
1500mAh)
• Specification
Size Of
Solar Panel
(mm)
Power of
Solar Panel
(w)
Voltage of
solar panel
(v)
Voltage of
water pump
(v)
Volume
of flow
(L/h)
Battery
Capacity
(mAh)
175*140 2.8 9 DC4.5 -12 150 -200 1500
4
Led
Light
Quantity
3
The
Color of led
light
Cold white