OVERVIEW OF YOUR CELSIUS PANEL HEATER
Your Celsius Panel Heater will provide background warmth.
Your Panel Heater is designed to take the chill off the room.
The surface of this Panel Heater can be painted with good quality paint (acrylic or enamel).
Decorating tip: All wall mounted heaters may cause paint to discolour or wall paper to lift.
OPERATING YOUR HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure
all packaging has been removed from the unit before use.
OPERATING INSTRUCTIONS
1. Before plugging in and using your new Celsius Panel Heater, check all surfaces to ensure
the heater is not damaged in any way.
2. Check that the On/Off switch is set to the Off position before plugging the heater into the
mains supply.
3. Use the On/Off switch along the side of the heater to turn your heater on.
CARE AND CLEANING
Do not attempt to dismantle the panel heater. There are no user serviceable parts. For service or
repair, contact an authorised electrical service technician.
Unplug the heater from the mains supply before cleaning. Ensure that the heater has been allowed to
cool down completely before cleaning.
To remove the unit from the wall, simply remove the bolt caps, unscrew the bolts with a screw driver
and then take the heater down. Use a vacuum cleaner to remove dust and fluff from behind the
heater.
The outside can be cleaned by wiping it over with a soft dry cloth.
NOTE: Do not use abrasive cleaning agents or polish, this can damage the surface and finish.
For short term non-use, simply turn off the unit with the power switch on the side of the heater and
disconnect the mains power supply at the wall.
SAFETY FEATURE
In case of overheating, this heater is fitted with a thermal fuse which is located inside the construction
of the heater. If this thermal fuse activates it will turn the heater off however the light in the power
switch will remain on to let you know there is still power going into the heater.
In the event that this happens, turn the heater off at the switch and the wall socket and unplug it.
Then contact our Customer Service Team.
WARNING: Do not use this heater with a separate programmer, remote-control system, separate
timer, or any other device that switches the heater on automatically, since a fire risk exists if the
heater is covered or positioned incorrectly.
WARNING: Keep all objects at least 1 metre from the front and sides of the appliance.
CAUTION: The heater generates heat during use. Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to persons.
IMPORTANT! NEVER COVER THIS HEATER
TECHNICAL SPECIFICATION
Model No: CELEPANEL, CELEPANELT
Supply: 220-240VAC 50Hz
Wattage: 400-425W
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. Refer to back of booklet.
To Next Page
Loading...