WALL MOUNTING POSITION INSTRUCTIONS
NOTE: Your Celsius panel heater should be installed with at least 300mm clearance from the
floor and any other surrounding parts including other appliances, side walls, ceilings, shelves
and soft furnishings.
300mm
300mm
300mm
300mm
CONTENTS
1 x Celsius panel heater
1 x Wall mounting accessories pack
2 x Drill bits (1 x 7mm for plasterboard or wooden walls, 1 x 8mm for drilling masonry)
4 x Rail fittings
4 x Screw bolts
4 x Bolt caps
NOTE: Please ensure you use the correct drill bit for the wall surface material you are mounting on to.
Please contact your local hardware retailer or builder for advice.
To Next Page
Loading...