OVERVIEW OF YOUR CELSIUS PANEL HEATER
Your Celsius Panel Heater will provide background warmth.
Your Panel Heater is designed to take the chill off the room.
The surface of this Panel Heater can be painted with good quality paint (acrylic or enamel).
Decorating tip: All wall mounted heaters may cause paint to discolour or wall paper to lift.
CARE AND CLEANING
Do not attempt to dismantle the Panel Heater. There are no user serviceable parts. For service or
repair, contact an authorised electrical service technician.
Unplug the heater from the mains supply before cleaning. Ensure that the heater has been allowed to
cool down completely before cleaning.
To remove the unit from the wall, simply remove the bolt caps, unscrew the bolts with a screw driver
and then take the heater down. Use a vacuum cleaner to remove dust and fluff from behind the
heater.
The outside can be cleaned by wiping it over with a soft dry cloth.
NOTE: Do not use abrasive cleaning agents or polish, this can damage the surface and finish.
For short term non-use, simply turn off the unit with the power switch on the side of the heater and
disconnect the mains power supply at the wall.
SAFETY FEATURE
In case of overheating, this heater is fitted with a thermal fuse which is located inside the construction
of the heater. If this thermal fuse activates it will turn the heater off however the light in the power
switch will remain on to let you know there is still power going into the heater.
In the event that this happens, turn the heater off at the switch and the wall socket and unplug it. Then
contact our Customer Service Team.
WARNING: Do not use this heater with a programmer, remote-control system , separate timer or any
other device that switches the heater on automatically, since a fire risk exists if the heater is covered
or positioned incorrectly.
WARNING: Keep all objects at least 1 metre from the front and sides of the appliance.
CAUTION: The heater generates heat during use. Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to persons.
IMPORTANT! NEVER COVER THIS HEATER
OPERATING INSTRUCTIONS
Before plugging in and using your new Celsius panel heater, check all surfaces to ensure the heater
is not damaged in any way.
Check that the On/Off switch is set to the Off position before plugging the heater into the mains
supply.
Use the On/Off switch along the side of the heater to turn your heater on.
WARNING! Take care in positioning your heater, using the timer will mean the heater will come on
automatically. Fire may result if placed next to combustible material.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase. Refer to back of booklet.
TECHNICAL SPECIFICATION
Model No: CELEPANELD
Supply: 220-240VAC 50Hz
Wattage: 400-425W
To Next Page
Loading...