Need help?Do you have a question about the centor S2 and is the answer not in the manual?
General| Aspect Ratio | 16:9 |
|---|---|
| Gain | 1.1 |
| Viewing Angle | 160 degrees |
| Material | PVC |
| Weight | 10 kg |
| Screen Size | 100 inches |
| Installation Type | Wall Mount |
Detailed steps for assembling the frame, showing specific component connections.
Continuation of frame assembly, illustrating further joining of frame parts.
Completing frame assembly, including a step for cutting sealing material.
Securing the frame to the opening, detailing screw placement and maximum spacing.
Correct and incorrect methods for fitting the frame flush with the opening edge.
Ensuring proper sealing against water ingress by checking the frame's fit to the floor.
Illustration of an incorrect installation method to avoid when fixing the frame.
Cleaning the frame and tracks after installation using a vacuum cleaner.
Routing the top cable for the first screen, showing the path and attachment mechanism.
Routing the bottom cable for the first screen, illustrating the path and tensioning points.
Routing the top cable for the second screen, showing the path and securing method.
Routing the bottom cable for the second screen, illustrating the path and tensioning mechanism.
Adjusting screen tension based on frame height ranges for proper operation.
Close-up view of the tensioning mechanism and how to engage it correctly.
Illustrating tensioning adjustments specific to two different frame height categories.
Visual comparison of correct and incorrect methods for applying screen tension.
Final step in applying tension to both screens, ensuring even operation.
Installing the first part of the cover, showing component attachment and screw usage.
Installing the second set of cover components, detailing screw placement and quantities.
Attaching the final cover piece, illustrating the correct fitting method.
To Next Page