Pg. 15V06232023
MAINTENANCE SCHEDULE
ROUTINE
HOME
MAINTENANCE
Links, Pull Pins, Spring
Clips, Swivels, Weight Stack Pins
WEEKLY
Upholstery
WEEKLY
Cables and their Fittings
WEEKLY
Tautness of all Shrouds
WEEKLY
Accessory Bars and
Handles
3 MONTHS
All Decals
3 MONTHS
All Nuts and Bolts.
Tighten if Needed
3 MONTHS
Anti-Skid surfaces
3 MONTHS
Guide Rods
with a Teflon based lubricant
3 MONTHS
Seat Sleeves and
all Plastic Slides
3 MONTHS
All Glossy Finishes
YEARLY
Cables, Belts and
Connecting Parts
2 YEARS
MAINTENANCE
WARNING
DO NOT place styrofoam or printed materials on the seat pads. Over time, these may stick to the pads and
mar the surface.
DO NOT leave items sitting on the seat pads, these pads have a special density that takes shape to
objects and small objectswill leave imprints in the surface that may take time to come out.
• Periodically inspect the cables for splitting, cracking or fraying. Also watch for bulging or at areas in the cable.
• Immediately replace cables at the rst signs of damage or wear. Never use equipment with damaged or worn cables.
• Cables naturally stretch over time, so check cable slack periodically and adjust cable tension as needed.
• Regularly inspect product for loose hardware.
• Do not use or store equipment outdoors.
• Inspect snap links, swivels, handles and weight stack pin for wear or damage. If wear or damage exists,
replace with Inspire Fitness parts only.
• Locate and familiarize yourself with all warning decals on the Smith Machine Functional Trainer.
• Replace damaged or worn upholstery immediately.
• Periodically wipe down guide rods with a dry cloth and re-apply a thin coat of a Teon™ based lubricant.
To Next Page
Loading...