Page 4 For technical questions, please call 1-888-866-5797. Item 40211
SAFETY OPERATION MAINTENANCEINSTALLATION
Air Dryer Safety Warnings
1. Risk of fire or explosion - do not spray
flammable liquid in a confined area or towards a
hot surface. Spray area must be well-ventilated.
Do not smoke while spraying or spray where
spark or flame is present. Arcing parts - keep
Air Dryer at least 20 feet away from explosive
vapors, such as when spraying with a spray gun.
2. Do not use to supply breathing air.
3. Do not leave Air Dryer unattended for
an extended period while plugged in.
Unplug Air Dryer after working.
4. Keep Air Dryer well-ventilated.
Do not cover Air Dryer during use.
5. Do not adjust internal components other
than instructed in this manual.
6. Air Dryer head gets hot during operation. Do
not touch it or allow children nearby during
or immediately following operation.
7. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
8. All air line components, including hoses, pipe,
connectors, filters, etc., must be rated for a minimum
working pressure of 150 PSI, or 150% of the
maximum system pressure, whichever is greater.
9. USE OF AN EXTENSION CORD IS NOT
RECOMMENDED. If you choose to use an
extension cord, use the following guidelines:
TABLE A: RECOMMENDED MINIMUM WIRE
GAUGE FOR EXTENSION CORDS
(120 VOLT)
NAMEPLATE
AMPERES
(at full load)
EXTENSION CORD
LENGTH
25′ 50′ 100′ 150′
0 – 6 18 16 16 14
6.1 – 10 18 16 Do not use.
10.1 – 12 16 16 Do not use.
12.1 – 16 14 12 Do not use.
a. Make sure your extension cord
is in good condition.
b. Be sure to use an extension cord which
is heavy enough to carry the current your
product will draw. An undersized cord will
cause a drop in line voltage resulting in loss
of power and overheating. Table A shows the
correct size to use depending on cord length
and nameplate ampere rating. If in doubt,
use the next heavier gauge. The smaller
the gauge number, the heavier the cord.
Note: Performance of the Air Dryer (if powered
by line voltage) may vary depending on
variations in local line voltage. Extension cord
usage may also affect tool performance.
10. Industrial applications must follow OSHA guidelines.
11. Maintain labels and nameplates on the
Air Dryer. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. This product is not a toy.
Keep it out of reach of children.
13. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
SAVE THESE INSTRUCTIONS.
To Next Page
Loading...