Centroid Acorn Plasma Users Manual Beta CNC12 v4.65 rev6
Torch Mounts: Floating heads, Magnetic breakaway and Round Mounts are all supported.
Magnetic Breakaway Torch Mounts.
Magnetic Breakaway combined with a sliding head (Floating Head) is a good choice. This setup provides good
protection with accurate Floating Head Torch touch off performance. This torch mount set up can also be used in
conjunction with ohmic/conductive touch off. Photo on left shows Magnetic Breakaway mount used with
ohmic/conductive touch off and the photo on the right shows a magnetic mount with a Floating Head Torch Touch
Off.
Magnetic Breakaway with Floating Head Touch Off
and Ohmic/Conductive Touch Off
Magnetic Breakaway with Ohmic/Conductive Touch Off
Page 12 D:\Keith Documents\centroid_acorn_plasma_users_manual_draft27.odt rev27 3-15-22
To Next Page
Loading...