EasyManua.ls Logo

Centurion Backfire E 640.27 - Page 12

Centurion Backfire E 640.27
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
e
f
g
h
3. The functions of your CENTURION pedelec are
operated with the buttons on the drive HMI
(e)
or
on the command console. Are you familiar with
all functions and displays? Check whether you
know the functions of all buttons on the drive HMI
or on the command console.
For more information see the system instruc-
tions of your drive manufacturer on the enclosed
CENTURION CD-ROM.
4. Your CENTURION pedelec has a pushing aid
(f)
. The pushing aid provides assistance during
pushing your CENTURION pedelec. Are you fa-
miliar with the pushing aid?
For more information see the system instruc-
tions of your drive manufacturer on the enclosed
CENTURION CD-ROM.
5. Are you familiar with the brake system? Have
a look at the bike card and check whether the
brake lever of the front brake is on the side you
are used to (right or left)
(g)
. If it is not, ask your
CENTURION dealer to switch the brake levers
before you set off for the first time.
Your new pedelec is equipped with modern
brakes which may be far more powerful than
those you were used to so far. Be sure to first
practice using the brakes on a level, non-slip
surface off public roads! Slowly approach higher
brake performances and speeds.
For more information see the chapter “The
brake system” in this translation of the original
CENTURION operating instructions as well as in
your comprehensive original CENTURION user
manual and in the instructions of the component
manufacturers on the enclosed CENTURION
CD-ROM.
6. Are you familiar with the type and functioning of
the gears
(h)
? Ask your CENTURION dealer to
explain you the gear system and make yourself
familiar with your new gears in an area free of traf-
fic, if necessary.
For more information see the chapter “The gears”
in this translation of the original CENTURION op-
erating instructions as well as in your comprehen-
sive original CENTURION user manual and in the
instructions of the component manufacturers on
the enclosed CENTURION CD-ROM.
7. Are saddle and handlebars properly adjusted?
The saddle should be set to a height from which
you can just reach the pedal in its lowest posi-
tion with your heel without tilting your hip. Your
leg should be fully stretched. Your CENTURION
dealer will be pleased to help you, if you are not
happy with your seating position.
For more information see the chapter “Adjust-
ing the CENTURION bike to the rider” in this
translation of the original CENTURION operating
instructions as well as in your comprehensive
original CENTURION user manual and in the in-
structions of the component manufacturers on
the enclosed CENTURION CD-ROM.