50
Component Shimano
1
(Nm) Avid
2
(Nm) Tektro
3
(Nm) Magura HS
4
(Nm)
Brake disc fixing (6-holes) 4 6.2 4 - 6
Brake disc fixing (Centerlock) 40
Hose (union nut) direct connection 4
Slave cylinder (bleeder screw) 4
Brake pad retainer at brake caliper 3 - 5
1
www.shimano.com
2
www.sram.com
3
www.tektro.com
4
www.magura.com
These values are reference values of the above-mentioned component manufacturers. Observe the values in the instructions of the component
manufacturers on the enclosed CENTURION CD-ROM.
These values do not apply to the components of other manufacturers.
I
Due to the unmanageable number of components on the market, CENTURION is not in a position to foresee every product that
will be replaced or newly assembled by third parties. Therefore CENTURION denies any liability for such kind of additions or mod-
ifications with regard to compatibility, torque values etc. Whoever assembles or modifies the CENTURION pedelec shall ensure
that the pedelec was assembled according to the state-of-the-art in science and technology.
I
Some components have the maximum permissible torque values printed on them. Use a torque wrench and never exceed the
maximum torque value! If you are in doubt or if you have any questions, contact your CENTURION dealer.
i
For more information on components not listed in these tables, see the instructions of the component manufacturers on the en-
closed CENTURION CD-ROM.
To Next Page
Loading...