IGNITION OF THE APPARATUS
Turn the timer knob (A) clockwise.
PROGRAMMING WORKING TIME
Set the working time from 0 to 60 minutes by turning the timer knob (A)
clockwise. When the time has elapsed, the knob returns automatically to the
“0” position. During operation of the apparatus, you can at any moment turn
the knob counter clockwise to take it back to “0”, thus using it as a switch.
PROGRAMMING OF TEMPERATURE
Set the desired working temperature by turning the knob (C) of the thermo-
stat clockwise.
USE OF THE SWITCHES
Use the switches(D) in order to ignite or to extinguish every single lamp.
NOTE:
- The Company declines all responsibility for any injury to persons
or damage to things caused by installation or assembly that has
not been carried out in compliance with the General Warnings, or
using supports and/or accessories other than those manufactured
by us, or for any injury to person or damage
to things caused by installation or assembly that have been carried
out by non-specialized or non-authorized sta.
- In the case of the wall-mounted arm, the Company moreover
declines all responsability fo injury or damage resulting from the
unsuitabilityof any support made of masonry or other material.
To Next Page
Loading...
Need help?
General
