EasyManua.ls Logo

Cerwin-Vega CVA-115 User Manual

Cerwin-Vega CVA-115
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ACTIVE SUBWOOFER
CVA-115
Question and Answer IconNeed help?

Do you have a question about the Cerwin-Vega CVA-115 and is the answer not in the manual?

Cerwin-Vega CVA-115 Specifications

General IconGeneral
TypeActive Subwoofer
Driver Size15 inches
Input TypesXLR, 1/4" TRS
Max SPL130 dB
Impedance4 Ohms
Enclosure TypeBass Reflex
Power Output1000 Watts
Amplifier Power1000 Watts

Summary

Introduction

Important Symbols and Safety Instructions

Explanation of Graphic Symbols

Explains warning symbols like exclamation point and lightning flash on the device.

Important Safety Instructions

Lists critical safety precautions for operating the device to prevent shock and damage.

Before You Begin

Built-in Amplifier Precautions

Details precautions related to the amplifier module, heat, and electrical safety during use.

Specifications

Back Panel Controls, Connectors and Indicators

Panel Indicators

Describes the meaning of Power, Limit, Protect, and Signal LEDs on the amplifier panel.

Audio Connectivity

Details XLR and 1/4" input/output connectors and THRU outputs for signal routing.

Sound Shaping Controls

Explains Level, High Pass, Low Pass filters, and the Polarity switch for audio tuning.

Linking and Power Management

Covers Master/Slave linking, Link Out functionality, and the Power switch.

System Configurations

Single Subwoofer Setup

Illustrates connecting one active subwoofer with two active satellite speakers from a mixer.

Dual Subwoofer Setup

Shows how to connect two active subwoofers with two active satellite speakers from a mixer.

Multiple Subwoofers Daisy-Chained Together

Diagrams connecting multiple active subwoofers in a chain for expanded system setup.

Contact Information

Related product manuals