Product details
Product guide – CESAB S200
58
Mono mast
A centrally positioned mast with the chain inside
the truck prole. It is suitable for low lift heights
where the operator often works close to the truck,
e.g. when using it as a work table. Only available
on the S208L.
Feature
The mono mast has a closed prole, i.e. the chain
runs inside the mast prole.
Benet
It is easy to move around the mast with a very
small risk of crushing injuries.
Simplex
The Simplex mast relies on a single frame. Available on till S210, S212, S212L
and S212S.
Feature
The forks travel inside the frame prole.
Benet
Maximum mast height remains the same even during lifting. A simple solution that
suits applications not requiring high lift heights.
Duplex Tele
This mast uses two sections and a centrally loca-
ted cylinder. Available on S210, S212, S212L,
S212S and S220D.
Feature
The Duplex Tele mast has a free-lift range of 76
mm.
Benet
Because the pallet can be lifted from the oor, it
is possible to transport goods horizontally wit-
hout raising the mast and increasing its minimum
height. Especially useful if the site has low ceiling
clearance or doorways.
To Next Page
Loading...
Need help?
General
