GUIDE FOR SAFE USE
2. If the latch plate is not positioned in the correct location along the seat belt, squeeze the latch
plate ends together along its long edges in order to more easily adjust its location up or down along
the length of the belt.
3. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is
secure.
4. Put the lap portion of the belt low on your hips. Pull up on the shoulder part so the belt is snug
across your hips.
5. Position the shoulder belt over your shoulder and across your chest. The shoulder belt should
fit against your chest. If it is loose, pull the belt out all the way and then
let it retract.
6. To release the buckle, firmly press the release button.
-86-
To Next Page
Loading...
