0DLQWHQDQFH ,QIRUPDWLRQ
Tightening Torque
Item Torque N·m(kgf·m) Item Torque
N·m(kgf·m)
5mm Bolt, nut 5(0.5) 5mm Screw 4(0.4)
6mm Bolt, nut 10(1.0) 6mm Screw 9(0.9)
8mm Bolt, nut 22(2.2) 6mmSH Bolt with flange, 10(1.0)
10mm Bolt, nut 34(3.5) 6mm Bolt with flange, nut 12(1.2)
12mm Bolt, nut 54(5.5) 8mm Bolt with flange, nut 26(2.7)
10mm Bolt with flange, nut 39(4.0)
For others not listed in the chart, refer to the standard tightening torque.
Notes: Apply some engine oil on the part of screw thread and adjoining
surface.
Item
Thread Dia.
(mm)
Quantity Torque
N·m(kgf·m)
Remark
Bolt, Engine Assembling M12×1.25×140 2
50
60
Bolt, Swing Arm M10×1.25×70 16
40
50
Bolt, Rear Absorber M12×1.25×60 4
50
60
Bolt, Front Absorber M10×1.25×55 4
40
50
Bolt, Rear Wheel Shaft Holder M10×1.25×100 4
40
50
Mounting Nut, Rim 901-07.00.02 M20 16
70
80
Rim, Rim Shaft 903-07.00.03 M24 4
130
150
Nut, Parking Caliper M10×1.25 2
40
50
Bolt, Front Axle M10×1.25×90 1
40
50
Bolt, Front Axle M10×1.25×25 2
40
50
Bolt, Rear Brake Caliper M10×1.25×20 2 40~50
Bolt, Front Brake Disc 901-08.00.03 8
25
30
Nut, Tie-Rod M10×1.25 4
40
50
Locknut, Steering Stem M12×1.25 1
40
50
Bolt, Muffler M8×30 1
30
35
Bolt, Exhaust Pipe M8×35 2
30
35
Mounting Bolt, Rear Axle M10×1.25×110 2
40
50
Bolt, Front Bracket Front Axle M8×14 2
35
45
Bolt, Rear Bracket Front Axle M8×14 2
35
45
Back End Bolt, Rear Trans.
Shaft
901-30.00.01 6
40
50
Front End Bolt, Rear Trans.
Shaft 901-29.00.01 4
35
45
Bolt, Front Trans. Shaft 901-29.00.01 8
35
45
Bolt, Front Brake Caliper M8×20 4
20
30
Nut, Tilt Support M8×1.25 4
35
45
Mounting Bolt, Steering M8× 14 4
35
45
Locknut, Cross Axle Steering M8×25 2
35
45
Thermo Switch CF250T-420500 1
9
12
To Next Page