MAINTENANCE
143
Cooling System
Inspect coolant level
1. Place vehicle on level ground with the transmission in park.
2. Wait for the engine cooling down to ambient temperature,
then inspect the coolant level.
3. Release the LH & RH hood clasps, then turn up the hood.
4. Verify coolant level is between upper and lower marks at
the side of the coolant reservoir ( 1 ).
5. Reinstall the front hood.
CAUTION
If coolant level is increased, contact your dealer to inspect the
antifreeze content of the coolant as soon as possible.
Distilled water can be used for short time if coolant is not
available, softened tap water could be the second choice. Never
add hard water or salt water, as it is harmful to the engine.
The radiator fan operation is automatically switched on or off
according to the coolant temperature during operation.
≤120°
UPPER
LOWER
1
To Next Page