MAINTENANCE
161
Change the Wheel
Disassembling
1. Place vehicle on level ground.
2. Lift the vehicle and support the vehicle securely under the
frame using a jack or other suitable tool so the wheel is o
the ground.
3. Remove the hexagon slotted wheel nut ( 1 ).
4. Remove wheels.
Installation
1. Install the wheels onto the wheel hub and secure with wheel
nuts.
2. Torque the wheel nuts to specation.
Wheel Nut Torque: 52 ~ 59 ft-lb. (
70 ~ 80 N·m
)
3. Remove the vehicle support and place vehicle on the
ground.
1
1
To Next Page