CONTROLS AND FEATURES
59
Main Light Switch
The main light switch consists of 3 positions. Turn the switch to
select the following functions:
When the switch is on this position, head light, position
light, tail light and instrument light are ‘on’.
When the switch is on this position, position light / tail
light will be ‘on’ and head light will be ‘o’.
●
When the switch is on this position, all lights are turned o.
Note:
Ignition key must be turned to ‘ON’ position before operating
head lights.
CAUTION
Do not use the headlights with the engine turned o for more
than 15 minutes. The battery may discharge to a point that the
starter motor will not operate properly. If this should happen,
remove the battery and recharge it.
To Next Page