CF MOTO CFORCE 1000 - Transmission, Drive Systems, and Dashboard

SAFETY DECALS & LOCATIONS
52
A
B
3
2WD / 4WD System Switch
This vehicle is equipped with on-command “2-WD”/”4-WD” and
”4-WD/F-LOCK” switches. Activate these switches according to
the traction required for di󰀨erent driving conditions.
A
:
Switches two wheel drive (2-WD) and four wheel drive (4-WD).
B
:
Switches four wheel drive (4-WD) and four wheel drive lock (F-lock).
WARNING
The vehicle should be stopped before applying or releasing
the function of 2WD/4WD/F-lock. Applying or releasing drive
modes while the vehicle is in motion can lead to component
damage.
“F-lock” Operation
In “F-lock” mode, both front axles are locked together and rotate
at the same speed to provide maximum front wheel traction.
The steering will require more force for turning. The drive mode
indicator on the dashboard will ash until front di󰀨erential lock is
engaged.
Riding before the differential is properly engaged (e.g. when
the indicator light is ashing) will cause the engine speed to be
limited until engagement is complete.
Maximum traveling speed in F-lock is limited to 22 mph (30 km/
h). If conditions require full engine power to be available, press
the override switch on the left control to disable speed limiting.