OPERATION OF YOUR ATV
93
Driving Procedures
1. Sit upright with both feet on the footrests and both hands on
the handlebars.
2. Start the engine and allow it to warm up, apply the brakes,
then shift the transmission into gear.
3. Check your surroundings and determine your path of travel.
4. Release the brakes.
5. Slowly depress the throttle with your right thumb and begin
driving. Vehicle speed is controlled by the amount of throttle
opening.
6. Drive slowly. Practice maneuvering and using the throttle
and brakes on level surfaces.
To Next Page
Loading...
