CF 600 - Page 107

                
 


III. SpecificaCons and parameters








～

6
105
USENAVODILA ZA UPORABO
NAMESTITEV
Napajalno enoto položite na primerno mesto in se prepričajte, da sesalec doseže vse
kote bazena. Napajalna enota mora biti položena vsaj 3,5 metra od roba bazena.
POTAPLJANJE SESALCA
• Ko sesalec potapljate v bazen, bo dno obrnjeno proti steni. Napravo držite za ročaj in
jo potopite v vodo. Sesalec bo počasi sprostil zrak (zrak v sesalcu mora biti popolnoma
izpraznjen, v nasprotnem primeru lahko vpliva na normalno delovanje naprave).
Poskrbite, da se bo sesalec naravno potopil na dno bazena.
11. For the cleaning in different seasons, the filter screens with different density can be
changed. Please contact the agent to buy filter screen with different density.
12. Ensure that the PH value of the water of the swimming pool is 7.0-7.2.
13. It is forbidden to put water treatment chemicals into the machine, to use the machine for
chemical distribuCng. If the machine is damaged for this reason, the manufacturer is not
responsible for the warranty.
Ma[ers needing a[enCon:
1. When puXng the cleaner into the swimming pool, the bo[om of the cleaner shall face the
pool wall, hold the handle and put the cleaner into the water. And the cleaner will slowly
discharge the gas (the gas in the cleaner must be completely discharged, otherwise it will
affect the normal opera7on of the machine). Make the machine naturally sinks to the boJom
of the pool.
2. When taking out the cleaner from the pool, you only can hold the handle, do not pull the
cable.
3
11. For the cleaning in different seasons, the filter screens with different density can be
changed. Please contact the agent to buy filter screen with different density.
12. Ensure that the PH value of the water of the swimming pool is 7.0-7.2.
13. It is forbidden to put water treatment chemicals into the machine, to use the machine for
chemical distribuCng. If the machine is damaged for this reason, the manufacturer is not
responsible for the warranty.
Ma[ers needing a[enCon:
1. When puXng the cleaner into the swimming pool, the bo[om of the cleaner shall face the
pool wall, hold the handle and put the cleaner into the water. And the cleaner will slowly
discharge the gas (the gas in the cleaner must be completely discharged, otherwise it will
affect the normal opera7on of the machine). Make the machine naturally sinks to the boJom
of the pool.
2. When taking out the cleaner from the pool, you only can hold the handle, do not pull the
cable.
3