EasyManua.ls Logo

CF 600 - Page 147

Default Icon
153 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
                
 

III. SpecificaCons and parameters










6
145
USEИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
УСТАНОВКА
Блок управления электропитанием должен быть размещен в подходящем месте, чтобы
робот-очиститель мог добраться до каждого уголка бассейна. При этом блок управления
электропитанием должен находиться на расстоянии не менее 3,5 метров от краев
бассейна.
ПОГРУЖЕНИЕ РОБОТА-ОЧИСТИТЕЛЯ
При опускании робота-очистителя в бассейн его дно должно быть обращено к стенке
бассейна. возьмитесь за рукоятку и опустите очиститель в воду. При этом робот будет
медленно сбрасывать воздух (воздух из робота-очистителя должен быть полностью
выпущен, иначе это повлияет на нормальную работу устройства). Дайте роботу-
очистителю естественным образом опуститься на дно бассейна.
11. For the cleaning in different seasons, the filter screens with different density can be
changed. Please contact the agent to buy filter screen with dierent density.
12. Ensure that the PH value of the water of the swimming pool is 7.0-7.2.
13. It is forbidden to put water treatment chemicals into the machine, to use the machine for
chemical distribuCng. If the machine is damaged for this reason, the manufacturer is not
responsible for the warranty.
Ma[ers needing a[enCon:
1. When puXng the cleaner into the swimming pool, the bo[om of the cleaner shall face the
pool wall, hold the handle and put the cleaner into the water. And the cleaner will slowly
discharge the gas (the gas in the cleaner must be completely discharged, otherwise it will
aect the normal opera7on of the machine). Make the machine naturally sinks to the boJom
of the pool.
2. When taking out the cleaner from the pool, you only can hold the handle, do not pull the
cable.
3
11. For the cleaning in different seasons, the filter screens with different density can be
changed. Please contact the agent to buy filter screen with dierent density.
12. Ensure that the PH value of the water of the swimming pool is 7.0-7.2.
13. It is forbidden to put water treatment chemicals into the machine, to use the machine for
chemical distribuCng. If the machine is damaged for this reason, the manufacturer is not
responsible for the warranty.
Ma[ers needing a[enCon:
1. When puXng the cleaner into the swimming pool, the bo[om of the cleaner shall face the
pool wall, hold the handle and put the cleaner into the water. And the cleaner will slowly
discharge the gas (the gas in the cleaner must be completely discharged, otherwise it will
aect the normal opera7on of the machine). Make the machine naturally sinks to the boJom
of the pool.
2. When taking out the cleaner from the pool, you only can hold the handle, do not pull the
cable.
3

Related product manuals