EasyManua.ls Logo

CF 600 - Page 24

Default Icon
153 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY ADVICE
22
• When the cleaner is placed on shore or is taken out from the pool, please make sure to
turn o the power supply, otherwise it will easily cause serious damage to the cleaner.
• The power cord of the cleaner must be plugged into the socket with leakage protection
device. No one is allowed to enter the swimming pool when the cleaner is working, so as
to avoid danger and injury.
• When putting the cleaner into the swimming pool or take it out from the swimming pool,
you must hold the handle. Do not pull the cable. Before starting the cleaner every time,
exhaust the gas in the machine as much as possible (there is no bubbles or the machine
completely sinks to the bottom of the pool), so as to avoid the gas aecting the normal
operation of the cleaner.
• Before starting the cleaner, the filter screen must be installed, and at the same time, it must
be confirmed that the cable is completely relaxed, so as to avoid cable entanglement
during work, which will aect the cleaning eect of the cleaner. In serious cases, it may
cause damage to the cleaner.
• Clean the filter box in time after each use of the cleaner, so as not to aect the work of
the cleaner due to excessive dirt in the filter box.
• When the cleaner is not in use, please store the cleaner in a cool and ventilated place
indoors. Avoid direct sunlight.
• When the cleaner is working, the power supply control box should be placed in the
shade. Do not place or cover anything on the power supply control box to prevent
damage to the internal electrical components due to overheating.
• Non-professionals shall not disassemble the main machine body of the cleaner and the
power supply control box at will, to avoid danger or avoid damage to the cleaner.
• To prevent accidents, it is recommended that the power supply box should be connected
to the fixtures beside the pool with safety ropes before use.
• It is strictly forbidden to use this machine outsides its operating conditions. Please read
this user manual carefully before using the machine.
• For the cleaning in dierent seasons, the filter screens with dierent density can be
changed. Please contact the agent to buy filter screen with dierent density.
• Ensure that the PH value of the water of the swimming pool is 7.0-7.2.
• It is forbidden to put water treatment chemicals into the machine, to use the machine
for chemical distributing. If the machine is damaged for this reason, the manufacturer is
not responsible for the warranty.
SAFETY INSTRUCTIONS

Related product manuals