49
52675
Assemble the guide wheel (see Figure)
Take guide wheel to the aperture in the main housing, and then secure the
bolt.
Assemble the guard hood (see Figure)
Put the guard hood on main housing, Use 3pcs ST4 x 12 screw to secure
guard hood.
Assemble the brush
Standard we have 1pc wire brush and 1pc plastic brush in package box.
Press the quick-grip holder, and then put the brush, ensure the hex shaft into
the hole, release the grip holder.
Height adjustment of telescopic extension (see Figure)
Undo the union nut until the e-joint brush handle can be moved in and out
freely. Now set the required working height and secure the handle in this
position by tightening the union nut again.
GB
To Next Page
Loading...