MAINTENANCE AND ADJUSTMENTS
8. Insert the dipstick into the oil filler hole, and then tighten the oil filler cap.
9. Reinstall the console.
TO CHANGE THE ENGINE OIL (WITH OR WITHOUT OIL FILTER CARTRIDGE REPLACEMENT)
1. Remove the console. (See page 109) for console removal and installation procedures.)
2. Start the engine, warm it up for several minutes, and then turn it off.
3. Place an oil pan under the engine to collect the used oil, and then remove the engine oil filler, cap.
4. Remove the engine oil drain, bolt to drain the oil from the crankcase.
-111-
To Next Page
Loading...