MAINTENANCE AND ADJUSTMENTS
NOTICE
In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix
any chemical additives with oil.
Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified.
In addition, do not use oils labeled "ENERGY CONSERVING II" or higher.
Make sure that no foreign material enters the crankcase.
10. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is
leaking, immediately turn the engine off and check for the cause.
11. Turn the engine off, wait at least ten minutes, and then check the oil level and correct it if necessary.
12. Reinstall the console.
-114-
To Next Page
Loading...