①
MAINTENANCE AND ADJUSTMENTS
8. Wash the sponge material in warm soapy water to remove remaining solvent, and then
rinse thoroughly with plain warm water.
9. Squeeze excess water out of the sponge material. NOTICE: Do not twist the sponge
material when squeezing it.
10. Allow the sponge material to dry thoroughly.
11. Inspect the sponge material and replace it if damaged.
12. Thoroughly apply dealer foam, air filter, oil or other quality liquid foam air filter oil (not spraytype)
to the sponge material.
13. The sponge material should be wet but not
dripping.
14. Pull the sponge material over its frame.
15. Reinstall the air filter element.
16. Reinstall the air filter case, cover and be sure the
crankcase breather hose is connected
17. Install the Console.
18. Install the seats.
-127-
To Next Page
Loading...